ISOmatrix has established a diverse consulting resource base staffed with exceptional people. Our team-member-specialists come to ISOmatrix with decades of hands-on experience implementing and maintaining Quality Management and Environmental Management systems. Each brings his/her unique experience set into ISOmatrix’s “Simple Quality Solutions Training."
The diversity of experience allows ISOmatrix to address unique process issues in a variety of industries and technologies. ISOmatrix’s Simple Quality Solutions Training allows for the standardization of approach to unique business applications.
| Supported Management Systems and Other Specs/Standards |
| Doc.
Number |
Title |
| OHSAS18001 |
Occupational health & safety
management systems |
| ISO9001:2000 |
Quality Management Systems -
requirements |
| ISO14001:2004 |
Environmental Management System
- Specification for guidance and use |
| ISO19011 |
Guidelines for quality and/or
environmental management systems auditing |
| AS9100
B |
Quality Management Systems -
Aerospace Requirements |
| AS9110 |
Quality Maintenance Systems -
Aerospace- Requirements for Maintenance Organizations |
| AS9120 |
Quality Management Systems -
Aerospace-Requirements for Stockist Distributors |
| ASA100 |
Aviation Suppliers Association
Quality System Standard |
| ISO13485 |
Medical Devices --Quality
Management Systems--Requirements for Regulatory Purposes |
| ISO17025 |
General requirements for the
competence of testing and calibration laboratories |
| ISO15189 |
Medical Laboratories--Particluar
Requirements for Quality and Competence |
| ISO14971 |
Medical Devices --Application of
Risk management to Medical Devices |
| TS16949 |
Quality Management
Systems--particular requirements for the application of ISO 9001:2000 for automotive production and
relevant service part organizations |
| TL9000
Part 1 & 2 |
Quality Management System
Requirements |
| ISO10007 |
Quality Management
Systems--guideline for configuration management |
| ISO14644-1 |
Classification of Air
Cleanliness |
| ISO14644-2 |
Cleanroom Testing for Compliance |
| ISO14644-3 |
Metrology and Test Methods |
| ISO14644-4 |
Cleanroom Design &
Construction |
| ISO14644-5 |
Cleanroom Operations |
| ISO14644-7 |
Minienvironments & Isolators |
| Federal
Standard 209E |
Airborne Particulate Cleanliness
Classes in Cleanrooms and Clean Zones |
| CMMI
V1.2 |
Software and Systems Development |
| ASQR01 |
Supplier Quality System
Requirement--United Technologies |
| 21CFR807
(FDA 510K) |
Establishment Restration and
Device Listing For Manufacturers and Inintial Importers of Devices |
| 21CFR11 |
Electronic Records; Electronic
Signatures |
| 21CFR820 |
Quality System Regulation |
| QS9000 |
Quality System Requirements |
| D6-82479 |
Boeing Supplier Quality
Management System Requirements |
| A-610D |
Acceptability Of Electronic
Assemblies |
| MIL-Q-9858A |
Quality Program Requirements |
| Mil-STD-45662 |
Calibration Systems Requirements |
| MIL-Q-9858A |
Quality Program Requirements |
| Mil-I-45208A |
Magnified
Inspections |
| MIL-STD-45662A |
Calibration System Requirements |
| J-STD-001 |
Operator Proficiency |
| MiL-STD-1537C |
Test Method Standard Electrical
Conductivity Test |
| JESD-625A |
Requirements for Handling (ESDS)
Devices |
| Salt
Spray |
ASTM/DIN/SAE standards |
| Plating
thickness testing |
ASTM/DIN/SAE standards |
| ANSI/ESD
S20-20-1999 |
Development of an ESD Control
Program |
| AMS
2750C |
Heat Treat Pyrometry |
| AMS2759/1C |
Heat Treatment of Carbon and Low
Alloy Steel Parts |
| AMS2770G |
Hest Treatment of Wrought
Aluminum Alloy Parts |
| AMS2771C |
Hest Treatment of Aluminum Alloy
Castings |
| AMS2772C |
Heat Treatment of Aluminum Alloy
Raw Materials |
| AMS-H-81200A |
Heat Treatment of Titanium and
Titanium Alloys |
| AS9100C |
Aluminum Alloys Tempers |
| MIL-I-6875H |
Heat Treament of Steel |
| ASTM-E18-07 |
Standard Test Methods for
Rockwell Hardness of Metallic Materials |
| MIL-A-8625F |
Anodic Coatings for Aluminum and
Aluminum Alloys |
| MIL-STD-5541E |
Chemical Conversion Coatings on
Aluminum and Aluminum Alloys |
| QQ-P-416F |
Plating,
Cadmium |
| QQ-N-290A |
Nickel
Plating |
| ISO/IEC17025 |
General Requirements for the
Competence of Testing and Calibration Labs. |
| B117-03 |
Standard Practice for Operating
Salt Spray Apparatus |
| ASTM-E1417-05 |
Standard Practice for Liquid
Penetrant Testing |
| ASTmM-E709-01 |
Standard Guide for Magnetic
Particle Examination |
| MIL-STD-130F |
Identification Marking of
Military Property |
| ISO19011 |
Guidelines for qualityand/or
environmental management systems auditing |
| MMOG-LE |
Materials Management Operating
Guidelines |
| APQP |
Advanced Product Quality
Planning (Automotive) |
| Failure
Mode Effects and Analysis |
Failure Mode Effects and
Analysis (Automotive) |
| MSA |
Measurement Systems Analysis
(Automotive) |
| SPC |
Statistical Process Control
(Automotive) |
| PPAP |
Production Process Approval
Process (Automotive) |
| GM |
Customer Specific Requirements |
| Daimler-Chrysler |
Customer Specifics |
| Ford Motor |
Customer Specifics |
| Mercedes-Benz Customer Specifics |
| Delphi Customer Specifics |
| AM General Supplier Quality Guidelines |
| Certified Plexus Trainer (former) |
| Certified Quality Circle Facilitator (QCI Intl) |
| ISO 10012 |
Measurement Management Systems |
| ISO
10015 |
Quality Management Guidelines
for training |
| ISO
10017 |
Guidelines on statistical
techniques |
| Former CB auditor examiner |
IAOB |
| Hardness
Testing |
ASTM/DIN/SAE standards |
| Tensile
testing - fasteners |
ASTM/DIN/SAE standards |
| Hydrogen
embrittlement testing |
Fasteners |
|
| Supported
Technologies |
|
| Service |
Discipline |
| Manufacturing |
Machining, Turning, Punch
Presses, Molding |
| Assembly |
Manual, Automated |
| Plating |
Cadmium, Gold, Nickel, etc |
| Coating |
Teflon |
| Clean
Room |
<100, 100, 1,000, 1,000> |
| Laboratories |
Calibration, Testing |
| Software |
Design & Development -
Support |
| Electro Static Device (ESD) |
Deployment |
| Printed
Circuit Board (PCB) |
Assembly, Inspection, Test |
| Printed
Circuit Board Assembly (PCB) |
Manufacturing, Inspection, Test |
| Heat
Treatment |
Carbon, Steel, etc. |
| Electron
Beam Manufacturing (EBM) |
Titanium, Plastic |
| Quality
- ISO9001 |
Deployment, Support, Core
Training, Auditing, etc. |
| Aerospace
- AS9100 |
Deployment, Support, Core
Training, Auditing, etc. |
| Automotive
- TS16949 / QS9000 |
Deployment, Support, Core
Training, Auditing, etc. |
| Environmental
- ISO 14001 |
Deployment, Support, Core
Training, Auditing, etc. |
| Medical
Device - ISO 13485 |
Deployment, Support, Core
Training, Auditing, etc. |
| Laboratories
- ISO 17025 |
Deployment, Support, Core
Training, Auditing, etc. |
| Telecommunications
- TL9000 |
Deployment, Support, Core
Training, Auditing, etc. |
|
|
